Vintage 1970-78 Camaro Specifications download pdf (Page 14)

905077 REV B 7/23/14, 1970-78 CAMARO WITH A/C EVAP KIT PG 14 OF 28

OEM

Center Louver

Assembly

65118-VUP

Cut Foam Strip

Approximately 7”

Center Louver Installation

Mounting

Holes

62618-VCE

Center Louver

Hose

Adapter

(2) #8 X 1/2”

Pan Head

Screws

Center Louver

Duct Hoses

OEM Screws

1. Install foam strip onto center louver assembly as shown in Figure 16, below.

2. Install center louver duct hose adapter onto center louver assembly (See Figure 16, below).

3. Using the (2) mounting holes on the bottom side of the duct hose adapter as a guide, drill (2) 1/8” holes

in the louver assembly. Secure duct hose adapter to louver assembly using (2) #8 x 1/2” pan head screws

(See Figure 16a, below).

4. Reinstall dash.

5. Pull center louver duct hoses through dash and attach to center louver duct hose adapter as shown in

Figure 16, below.

6. Install center louver assembly into dash, using OEM mounting screws to secure louver assembly to dash

(See Figure 16, below).

Figure 16

Figure 16a

Figure 16b

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

No comments

Vintage 1970-78 Camaro Specifications Page 14