Vintage 1970-78 Camaro Specifications download pdf (Page 7)

905070 REV B 7/13/10, 1970-78 CAMARO w/ AC EVAP INST PG 7 OF 27

NOTE: REMOVAL OF DASHBOARD REQUIRED TO INSTALL THE EVAPORATOR. VINTAGE AIR

RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU

DISASSEMBLE AND REASSEMBLE THE DASHBOARD.

GLOVE BOX

INSTRUMENT

PANEL

CONTROL

PANEL

DRIVER SIDE

LOUVER KICK PANEL

KICK PANEL

FRESH AIR COVER

GLOVE BOX

DOOR

AC/ HEATER ASSEMBLY

& RELATED DUCTING

FIGURE 5

FIGURE 6

GLOVE BOX DOOR. SEE FIGURE 6

GLOVE BOX (DISCARD, RETAIN SCREWS). SEE FIGURE 5.

AC/HEATER/ EVAPORATOR ASSEMBLY AND ALL RELATED DUCTING (DISCARD), RETAIN SCREWS.

SEE FIGURE 6.

A/C HEAT OUTLETS (RETAIN). INSTRUMENT PANEL MUST BE REMOVED TO GET TO LEFT OUTLET,

AND CONTROL PANEL. SEE FIGURE 6.

CONTROL PANEL ASSEMBLY (RETAIN CONTROL PANEL) SEE FIGURE 6.

REFER TO CONTROL PANEL CONVERSION KIT INSTRUCTIONS FOR INSTALLATION OF CONTROLS.

REMOVE PASSENGER SIDE KICK PANEL FRESH AIR COVER (DISCARD) AND KICK PANEL (RETAIN). REMOVE

CABLE (DISCARD) FROM PANEL. SEE FIGURE 6.

REMOVE OEM DEFROST DUCT ASM.

PASSENGER COMPARTMENT

REMOVE THE FOLLOWING:

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

No comments

Vintage 1970-78 Camaro Specifications Page 7